CG0603MLA-5.5ME ChipGuard® MLA Series Varistor ESD Clamp Protectors
0402 and 0603 package options
Rated for IEC 61000-4-2, level 4
Withstands multiple ESD strikes
Low capacitance and leakage currents for invisible load protection
Tape and reel packaging
The ChipGuard® CG0402MLA and CG0603MLA Series is based on a multilayer metal oxide technology. The MLA family is designed to protect sensitive electronic circuits from the threat of electrostatic discharge ESD. The MLA series is available from 5.5 V to 26 V DC working voltages.
The wide operating voltage and temperature range makes this family ideally suited to IC power supplies, signal and control line protection.
Solder Reflow Recommendations
This product can be damaged by rapid heating, cooling or localized heating.
Heat shocks should be avoided. Preheating and gradual cooling recommended.
Excessive solder can damage the device. Print solder thickness of 150 to 200 um recommended.
Solder gun tip temperature should be kept below 280 °C and should not touch the device directly. Contact should be less than 3 seconds. A solder gun under 30 watts is recommended.
ECONLINE.NET is a global independent distributor and supplier of electronic components, a service-oriented company. We are one of the fastest growing distributors of Electronics Components product,supply channel partner with original electronics manufacturers through a global network serving electronics components new original.